Toshiba Qosmio X300 User Manual

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.14 Touch Pad and Finger Print Board
Removing the Touch Pad and Finger Print Board
Remove the touch pad and finger print board according to the following procedures and Figure
4-21.
1. Remove two flat cables from the wire guide.
2. Disconnect the three touch pad flat cables attached to the touch pad board.
3. Remove two M2.5x4 screws securing the touch pad.
4. Remove the touch pad bracket, touch pad and finger print board.
Figure 4-21 Removing the touch pad and finger print board
Qosmio X300 Maintenance Manual 4-38

Toshiba Qosmio X300 Specifications

General

Brand	Toshiba
Model	Qosmio X300
Category	Laptop
Language	English