2 Troubleshooting Procedures
QOSMIO X300 Series Maintenance Manual
9
Other problems that are not covered by the diagnostics program may be discovered by a
user.
1. If an error is detected when using an external USB device, perform the External USB
Devices Troubleshooting procedures in Section 2.5
2. If an error is detected when using the TV-out connection, perform the TV-Out Failure
Troubleshooting procedures in Section 2.6
3. If an error is detected when using the speakers, perform the Speaker Troubleshooting
procedures in Section 2.8
4. If an error is detected when using the modem, perform the Modem Troubleshooting
procedures in Section 2.10
5. If an error is detected when using the EXPRESS CARD unit, perform the EXPRESS
CARD Troubleshooting procedures in Section 2.11
6. If an error is detected when using the IEEE1394 device, perform the IEEE1394 device
Troubleshooting procedures in Section 2.12
7. If an error is detected when using the Wireless LAN, perform the Wireless LAN
Troubleshooting procedures in Section 2.13
8. If an error is detected when using the Bluetooth, perform the Bluetooth
Troubleshooting procedures in Section 2.15
9. If an error is detected when using the HDMI TV, perform the HDMI TV
troubleshooting procedures in Section 2.19.
10. If an error is detected when using the MIC, perform the MIC troubleshooting
procedures in Section 2.21
To Next Page
Loading...
Need help?
General