Toyota OEKAKI 50 User Manual

23
EN
Correct needle selection
A bent needle is extremely dangerous since it may break during use. Before sewing, place the flat side of the
needle on a flat surface and check it. Do not use the needle if the space between the needle and flat surface is
uneven.
■ Other needle problems
Note
• Since a bent or blunt needle is difficult to see, replace the needle if the sewing performance is poor.
• The point of the
needle is blunt/worn
away.
• The point of the
needle is bent.
Caution
Do not use damaged needles.
If a faulty needle is used, not only could it impair the sewing performance, but it could also
break, or damage the needle plate or hook.
Flat side of
needle
Flat surface
Flat surface

Toyota OEKAKI 50 Specifications

General

Brand	Toyota
Model	OEKAKI 50
Category	Sewing Machine
Language	English