38
Using the needle threader
For video tutorial, visit http://www.toyotaoekakisewing.com
* Use sewing machine needles no. 11/75 through 18/110 with the needle threader. (Needle no. 14/90 is
included when the sewing machine is purchased.)
The needle cannot be threaded if the thread is too thick for the needle. For details on possible needle and
thread combinations, refer to “Relationship between the needle, thread and fabric, and adjusting the thread
tension” (page 52).
■ Preparing to use the needle threader
1 Turn the handwheel towards yourself until
the needle is in its highest position.
Otherwise, press the (needle up/down) button to
raise the needle before turning off the sewing machine.
* If the needle is not in its highest position, it cannot be threaded.
2 Raise the presser foot lever.
3 Check that the thread has been passed through the
needle thread guide.
Before using the needle threader, use the main power switch to turn off the sewing
machine.
Not doing so could cause injuries.
Presser foot lever
To Next Page
Loading...
Need help?
General
