EasyManuals Logo

Triumph Speed Twin 900 User Manual

Triumph Speed Twin 900
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
MAINTENANCE AND ADJUSTMENT
103
Cooling System
To ensure efficient engine cooling, check
the coolant level each day before riding
the motorcycle, and top off the coolant
if the level is low.
Note
A year round, Hybrid Organic Acid
Technology (known as Hybrid OAT or
HOAT) coolant is installed in the cooling
system when the motorcycle leaves the
factory. It is colored green, contains a
50% solution of ethylene glycol based
antifreeze, and has a freezing point of
-31°F (-35°C).
Corrosion Inhibitors
Warning
HD4X Hybrid OAT coolant contains
corrosion inhibitors and antifreeze
suitable for aluminum engines and
radiators. Always use the coolant in
accordance with the instructions of
the manufacturer.
Coolant contains toxic chemicals that
are harmful to the human body.
Contact with skin or eyes may cause
severe irritation. Wear protective
gloves, clothing and eye protection
when handling coolant.
If coolant is inhaled, remove the
person to fresh air and keep
comfortable for breathing. In case of
doubt or persistent symptoms, seek
medical attention.
If coolant gets on your skin, flush
with water immediately. Remove
contaminated clothing.
If coolant gets in your eyes, flush with
water for at least 15 minutes and SEEK
MEDICAL ATTENTION IMMEDIATELY.
If coolant is swallowed, rinse the
mouth with water and SEEK MEDICAL
ATTENTION IMMEDIATELY.
KEEP COOLANT OUT OF THE REACH OF
CHILDREN.
Note
HD4X Hybrid OAT coolant, as supplied by
Triumph, is premixed and does not need
to be diluted prior to filling or topping
off the cooling system.
To protect the cooling system from
corrosion, the use of corrosion inhibitor
chemicals in the coolant is essential.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Twin 900 and is the answer not in the manual?

Triumph Speed Twin 900 Specifications

General IconGeneral
Displacement900 cc
Bore x Stroke84.6 mm x 80 mm
Compression Ratio11.0:1
Max Power65 PS / 64.1 bhp (47.8 kW) @ 7, 500 rpm
Max Torque80 Nm @ 3, 800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
ClutchWet, multi-plate assist clutch
Gearbox5-speed
FrameTubular steel, twin cradle frame
Front Tire100/90-18
Rear Tire150/70 R17
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
ExhaustBrushed 2 into 2 exhaust system with twin silencers
Front Suspension41mm telescopic forks, 120mm travel
Rear SuspensionTwin shocks, adjustable preload, 120mm rear wheel travel
Front BrakesSingle 310 mm disc, Brembo 4 piston caliper, ABS
Rear BrakesSingle 255mm disc, Nissin 2 piston floating caliper, ABS
Front WheelCast aluminium alloy, 18 x 2.75 in
Rear WheelCast aluminium alloy, 17 x 4.25 in
Seat Height765 mm
Fuel Tank Capacity12 litres
Dry Weight198 kg
Width Handlebars760 mm
Height Without Mirror1110 mm
Wheelbase1450 mm

Related product manuals