Triumph Speed Twin 900 User Manual

WARRANTY
162
Should a warranty claim become
necessary, TRIUMPH MOTORCYCLES
AMERICA LIMITED and its authorized
dealers shall not be liable for loss
of use, inconvenience, lost time,
commercial losses or other incidental or
consequential damages.
Any statement, condition,
representation, description or warranty
otherwise contained in any catalog,
advertisement or other publication shall
not be construed as enlarging, varying
or overriding anything contained herein.
TRIUMPH MOTORCYCLES AMERICA
LIMITED reserve the right to make
alterations or improvements without
notification to any model or motorcycle
without obligation to do so to
motorcycles already sold.
This warranty does not affect your
statutory rights.
Noise Control System
Warranty
Warning
This product should be checked
for repair or replacement if the
motorcycle noise has increased
significantly through use, otherwise
the owner may become subject
to penalties under state and local
ordinances.
The following warranty applies to the
noise control system and is in addition
to the general Triumph warranty and
the emission control warranty.
Per 40 C.F.R. § 205.173-1, Triumph
Motorcycles America Limited, warrants
that this exhaust system, at the time
of sale, meets all applicable U.S E.P.A.
federal noise standards. This warranty
extends to the first person who buys
this exhaust system for purposes other
than resale, and to all subsequent
buyers. Warranty claims should be
directed to an authorized Triumph
Motorcycles America dealer.
Triumph Motorcycles America Limited
warrants to the first, and each
subsequent owner, that the vehicle was
designed and built so as to conform, at
the time of sale, with the regulations
of the U.S. Environmental Protection
Agency (as tested following F-76 Drive-
By test procedure) and, at the time of
manufacture, was free from defects
in materials and workmanship which
would cause the motorcycle not to
meet the U.S. Environmental Protection
Agency Standards. This noise control
system warranty extends for a period
of 1 calendar year or 3,730 miles
whichever occurs first from the date

Triumph Speed Twin 900 Specifications

General

Displacement	900 cc
Bore x Stroke	84.6 mm x 80 mm
Compression Ratio	11.0:1
Max Power	65 PS / 64.1 bhp (47.8 kW) @ 7, 500 rpm
Max Torque	80 Nm @ 3, 800 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	5-speed
Frame	Tubular steel, twin cradle frame
Front Tire	100/90-18
Rear Tire	150/70 R17
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Exhaust	Brushed 2 into 2 exhaust system with twin silencers
Front Suspension	41mm telescopic forks, 120mm travel
Rear Suspension	Twin shocks, adjustable preload, 120mm rear wheel travel
Front Brakes	Single 310 mm disc, Brembo 4 piston caliper, ABS
Rear Brakes	Single 255mm disc, Nissin 2 piston floating caliper, ABS
Front Wheel	Cast aluminium alloy, 18 x 2.75 in
Rear Wheel	Cast aluminium alloy, 17 x 4.25 in
Seat Height	765 mm
Fuel Tank Capacity	12 litres
Dry Weight	198 kg
Width Handlebars	760 mm
Height Without Mirror	1110 mm
Wheelbase	1450 mm