EasyManuals Logo

Triumph Speed Twin 900 User Manual

Triumph Speed Twin 900
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
HOW TO RIDE THE MOTORCYCLE
82
Braking
1
1. Front brake lever
1
1. Rear brake pedal
Warning
WHEN BRAKING, OBSERVE THE
FOLLOWING:
- Close the throttle completely,
leaving the clutch engaged to allow
the engine to help slow down the
motorcycle.
- Shift down one gear at a time such
that the transmission is in first gear
when the motorcycle comes to a
complete stop.
- When stopping, always apply both
brakes at the same time. Normally
the front brake should be applied a
little more than the rear.
- Shift down or fully disengage the
clutch as necessary to keep the
engine from stalling.
- Never lock the brakes, as this
may cause loss of control of the
motorcycle and an accident.
Warning
For emergency braking, disregard
down shifting, and concentrate on
applying the front and rear brakes
as hard as possible without skidding.
Riders should practice emergency
braking in a traffic-free area.
Triumph strongly recommends that
all riders take a course of instruction,
which includes advice on safe brake
operation. Incorrect brake technique
could result in loss of control and an
accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Twin 900 and is the answer not in the manual?

Triumph Speed Twin 900 Specifications

General IconGeneral
Displacement900 cc
Bore x Stroke84.6 mm x 80 mm
Compression Ratio11.0:1
Max Power65 PS / 64.1 bhp (47.8 kW) @ 7, 500 rpm
Max Torque80 Nm @ 3, 800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
ClutchWet, multi-plate assist clutch
Gearbox5-speed
FrameTubular steel, twin cradle frame
Front Tire100/90-18
Rear Tire150/70 R17
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
ExhaustBrushed 2 into 2 exhaust system with twin silencers
Front Suspension41mm telescopic forks, 120mm travel
Rear SuspensionTwin shocks, adjustable preload, 120mm rear wheel travel
Front BrakesSingle 310 mm disc, Brembo 4 piston caliper, ABS
Rear BrakesSingle 255mm disc, Nissin 2 piston floating caliper, ABS
Front WheelCast aluminium alloy, 18 x 2.75 in
Rear WheelCast aluminium alloy, 17 x 4.25 in
Seat Height765 mm
Fuel Tank Capacity12 litres
Dry Weight198 kg
Width Handlebars760 mm
Height Without Mirror1110 mm
Wheelbase1450 mm

Related product manuals