EasyManuals Logo

Triumph Speed Twin 900 User Manual

Triumph Speed Twin 900
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
GENERAL INFORMATION
51
Traction Control Settings
Warning
Do not attempt to adjust the traction
control settings while the motorcycle
is in motion as this may lead to loss of
motorcycle control and an accident.
Warning
If the traction control is disabled,
the motorcycle will handle as normal
but without traction control. In this
situation accelerating too hard on
wet/slippery road surfaces may cause
the rear wheel to slip, and may result
in loss of motorcycle control and an
accident.
The traction control can be set to one of
the following conditions:
ON
Optimal traction control setting
for road use, allows minimal rear
wheel slip.
OFF
Traction control is turned OFF.
The TC disabled warning light
will be illuminated (see page 38).
Traction control defaults to ON after
the ignition has been switched OFF and
then switched ON again.
To Disable the Traction Control
Warning
After riding off-road with traction
control disabled, always make sure
that the traction control is enabled
when returning to ride on public roads.
Riding on public roads with the
traction control disabled may, if
accelerating too hard on wet/slippery
road surfaces, cause the rear wheel
to slip resulting in loss of motorcycle
control and an accident.
To disable the traction control setting:
Make sure the motorcycle is
stationary and in neutral.
Turn the ignition to the ON position
and put the engine start/stop
switch in the RUN position.
Press and release the SCROLL
button on the left hand handlebar
switch housing until ’ttcOn’ is shown
in the display.
Press and hold the SCROLL button
for more than one second to change
between traction control on and
traction control off.
1
1. Traction control off display
(Speed Twin 900 shown)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Twin 900 and is the answer not in the manual?

Triumph Speed Twin 900 Specifications

General IconGeneral
Displacement900 cc
Bore x Stroke84.6 mm x 80 mm
Compression Ratio11.0:1
Max Power65 PS / 64.1 bhp (47.8 kW) @ 7, 500 rpm
Max Torque80 Nm @ 3, 800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
ClutchWet, multi-plate assist clutch
Gearbox5-speed
FrameTubular steel, twin cradle frame
Front Tire100/90-18
Rear Tire150/70 R17
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
ExhaustBrushed 2 into 2 exhaust system with twin silencers
Front Suspension41mm telescopic forks, 120mm travel
Rear SuspensionTwin shocks, adjustable preload, 120mm rear wheel travel
Front BrakesSingle 310 mm disc, Brembo 4 piston caliper, ABS
Rear BrakesSingle 255mm disc, Nissin 2 piston floating caliper, ABS
Front WheelCast aluminium alloy, 18 x 2.75 in
Rear WheelCast aluminium alloy, 17 x 4.25 in
Seat Height765 mm
Fuel Tank Capacity12 litres
Dry Weight198 kg
Width Handlebars760 mm
Height Without Mirror1110 mm
Wheelbase1450 mm

Related product manuals