Triumph Speed Twin 900 User Manual

MAINTENANCE AND ADJUSTMENT
145
Headlight Adjustment
1
1. Headlight assembly mounting bolt
To adjust the headlight beam:
▼ Always make sure the handlebars
are in the straight ahead position.
▼ Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolts
and altering the position of the
headlight assembly.
▼ Retighten the headlight assembly
mounting bolts after adjustment to
89 lbf in (10 Nm).
Tail Lights
The LED tail light units are sealed,
maintenance free LED units. The tail
light units must be replaced in the event
of the failure of the tail lights.
Multifunctional Tail Lights
(if equipped)
Speed Twin 1200 Only
The multifunctional tail light units
operate as the rear position light, brake
light and turn signals.
The multifunctional tail light units are a
sealed, maintenance free LED unit and
must be replaced in the event of the
failure of the tail lights.

Triumph Speed Twin 900 Specifications

General

Displacement	900 cc
Bore x Stroke	84.6 mm x 80 mm
Compression Ratio	11.0:1
Max Power	65 PS / 64.1 bhp (47.8 kW) @ 7, 500 rpm
Max Torque	80 Nm @ 3, 800 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	5-speed
Frame	Tubular steel, twin cradle frame
Front Tire	100/90-18
Rear Tire	150/70 R17
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Exhaust	Brushed 2 into 2 exhaust system with twin silencers
Front Suspension	41mm telescopic forks, 120mm travel
Rear Suspension	Twin shocks, adjustable preload, 120mm rear wheel travel
Front Brakes	Single 310 mm disc, Brembo 4 piston caliper, ABS
Rear Brakes	Single 255mm disc, Nissin 2 piston floating caliper, ABS
Front Wheel	Cast aluminium alloy, 18 x 2.75 in
Rear Wheel	Cast aluminium alloy, 17 x 4.25 in
Seat Height	765 mm
Fuel Tank Capacity	12 litres
Dry Weight	198 kg
Width Handlebars	760 mm
Height Without Mirror	1110 mm
Wheelbase	1450 mm