Default Setting (System Menu)
9-13
9
Error Handling
Select whether to cancel or continue the job when an error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper sizes and media types.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
No Staple Error
Select what to do when staples run out during printing.
NOTE: This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
Finished Pages Exceeded
Select what to do when finishing (stapling or offsetting) capacity is exceeded during printing.
NOTE: This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
Item Description
1-sided Printed in 1-sided
Display Error Error message to cancel printing is displayed.
Item Description
Ignore The setting is ignored and the job is printed.
Display Error Error message to cancel printing is displayed.
Item Description
Ignore Printing continues without stapling.
Display Error Error message to cancel printing is displayed.
Item Description
Ignore Printing continues without finishing.
Display Error Error message to cancel printing is displayed
To Next Page
Loading...
Need help?
General
