Basic Operation
3-4
Enter key and Quick No. Search key
This section explains how to use the Enter key and Quick No. Search key on the operation panel.
Using the Enter ( ) key
The Enter key works in the same way as keys displayed on the touch panel, such as [OK] and [Close].
The Enter symbol (ļø ) is displayed next to the keys whose operations are carried out by the Enter key (e.g.
[ļø OK], [ļø Close]).
The operation of the Enter key is explained below using copy paper selection as an example. For details of the
procedure, refer to Paper Selection on page 4-3.
1 In the paper selection screen, press the key for the
cassette containing the required paper size.
The Enter (ļø ) symbol appears on the [OK] on the
touch panel, indicating that the Enter key performs
the same action as [OK].
2 To copy using the selected paper, press the Enter
key (or [OK]).
Using the Quick No. Search ( ) key
Use the Quick No. Search keys to perform an action by simply entering a number directly using the numeric
keys. For example, you can specify the speed dial for a transmission destination or recall a stored program by
its program number.
The Quick No. Search key performs the same action as the [No.] displayed on the touch panel.
The use of the Quick No. Search key is explained below using an example in which a speed dial number is
specified and used to select a destination. For more information on speed dialing, refer to Specifying
Destination on page 3-40.
1 Press the Quick No. Search key (or [No.]) in the
basic send screen.
2 In the number entry screen, use the numeric keys
to enter the speed dial number.
3 If you entered a speed dial number between 1 and
3 digits long, press the Enter key (or [OK]).
The specified destination appears in the
destination list.
NOTE: If you enter a 4-digit speed dial number, the
operation in step 3 can be omitted. The basic send
screen appears and the specified destination appears
in the destinations list.
To Next Page
Loading...
Need help?
General
