Default Setting (System Menu)
9-63
9
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH).
The table below shows the available settings.
Use the procedure below to specify an LF action.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of LF Action.
3 Press [LF Only], [LF and CR] or [Ignore LF].
4 Press [OK].
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings.
Use the procedure below to specify a CR action.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of CR Action.
3 Press [CR Only], [LF and CR] or [Ignore CR].
4 Press [OK].
Job Name
Set whether the job name set in the printer driver is displayed.
Use the procedure below to set the Job Name.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of Job Name.
3 Select [Off] or [On].
4 Press [OK].
Item Description
LF Only Only line feed performed.
LF and CR Line feed and character return performed.
Ignore LF No line feed performed.
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
To Next Page
Loading...
Need help?
General
