Maintenance
11-12
3 Open the stopper and remove the empty staple
cartridge.
NOTE: The staple cartridge can only be removed
when it contains no more staples.
4 Insert the new staple cartridge into the staple
cartridge holder and close the stopper.
5 Re-install the staple cartridge holder.
When re-installing, align the triangle marks on the
staple cartridge holder and the staple unit. The
staple cartridge holder will click into place when it
has been inserted correctly.
6 Close the front cover 1 and 2.
Emptying the Punch Waste Box (Option)
If a message is displayed on the machine operation panel indicating that the waste punch box is full, be sure to
empty the scraps in the punch waste box.
Leave the main power switch on the machine switched ON ( | ) while performing this procedure.
To Next Page
Loading...
Need help?
General
