34 – Controls, housing
1 Mechatronic unit
⇒ “1.1 Exploded view - mechatronic unit”, page 41
⇒ “1.2 Removing and installing mechatronic unit for dual clutch
gearbox J743 ”, page 42
⇒ “1.3 Moving mechatronic unit for dual clutch gearbox J743 into
removal position by hand”, page 55
1.1 Exploded view - mechatronic unit
1 - Bolt
❑ For securing mecha‐
tronic unit for dual clutch
gearbox -J743- on gear‐
box housing.
❑ Qty 3, M8 x 35
❑ Always renew after re‐
moving.
❑ Specified torque and
tightening sequence
⇒ page 42
2 - Bolt
❑ For securing mecha‐
tronic unit for dual clutch
gearbox -J743- on gear‐
box housing.
❑ Qty 4, M8 x 90
❑ Always renew after re‐
moving.
❑ Specified torque and
tightening sequence
⇒ page 42
3 - Mechatronic unit for dual
clutch gearbox -J743-
Note
❑ ⇒ “1.2 Removing and in‐
stalling mechatronic unit
for dual clutch gearbox
J743 ”, page 42
❑ ⇒ “1.3 Moving mecha‐
tronic unit for dual clutch
gearbox J743 into re‐
moval position by hand”,
page 55
Golf 2013 ➤
7-speed dual clutch gearbox 0CW - Edition 10.2012
1. Mechatronic unit 41