– Secure wire holder -arrow- on back of alternator -C- in 9
o'clock position.
– Tighten threaded connections to specified torques
⇒ page 90 .
Caution
♦ When installing used poly V-belts observe the direction of
rotation marked on removal!
♦ Before installing poly V-belt, make sure all assemblies
( alternator -C- / air conditioner compressor / vane pump)
are firmly in position.
♦ When fitting poly V-belt, make sure it is properly seated
on the pulleys.
– Connect battery -A- ⇒ page 4 .
Caution
Observe notes for battery pole terminal clamp bolt ⇒ page 1 .
– Start engine and check belt is running correctly.
– Switch off engine.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
94 Rep. gr.27 - Starter, current supply, CCS