– Secure wire holder -arrow- on back of alternator -C- in 9
o'clock position.
– Tighten threaded connections to specified torques
⇒ page 128 .
– Connect battery -A- ⇒ page 4 .
Caution
Observe notes for battery pole terminal clamp bolt ⇒ page 1 .
– Start engine and check belt is running correctly.
– Switch off engine.
7.12 Alternator -C- 1.9l diesel engine
7.12.1 Assembly overview
1 - Hexagon head flange bolts
❑ 20 Nm
2 - Poly V-belt tensioning ele‐
ment
3 - Hexagon head flange bolts
❑ 20 Nm
4 - Ancillary bracket
❑ For alternator -C- and
air conditioner compres‐
sor
❑ Tightening sequence ⇒
Engine; Rep. gr. 13
5 - Hexagon head flange bolts
❑ 40 Nm
6 - Hexagon head flange bolts
❑ 40 Nm
7 - Hexagon bolt with washer
and threaded element
❑ 2 Nm
8 - Protective cap for alternator
-C-
9 - Cross-head screws
❑ 2 Nm
10 - Protective cap for carbon
brushes
11 - Voltage regulator -C1-
❑ Removing and installing
⇒ page 168
12 - Alternator -C-
❑ Removing and installing
⇒ page 132
❑ Checking ⇒ page 89
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
7. Alternator C 131