17 Removing and installing trailer socket
-U10-
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Removing
– Remove bolts -arrows-.
– Remove trailer socket -U10- from retaining plate.
– Push connectors -2- in -direction of arrow- out of trailer socket
-U10- -1-.
– Unlock securing tabs -arrows- and then unlock retaining clips
-1- and -3- to -5-.
– Remove holding cage from connectors -2-.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
Note
Be especially careful that seals -1- and -3- are not damaged.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
380 Rep. gr.94 - Lights, bulbs, switches - exterior