– Loosen screw -arrow- at bottom left of headlight.
– Loosen screw -arrow- at bottom right of headlight.
– Adjust flush fit with body by screwing in or screwing out ad‐
justment bushing -arrow- at bottom left and bottom right of
headlight.
– Tighten all threaded connections to specified torques
⇒ page 214 .
– Check and readjust headlight to ensure gaps are even all
round.
– Install the radiator grille ⇒ General body repairs, exterior; Rep.
gr. 66 .
– Check headlight functions.
– Check headlight settings and adjust headlights if necessary
⇒ Maintenance ; Booklet 20.1 ; Descriptions of work .
1.4 Renewing bulbs
1.4.1 Renewing headlight dipped beam bulb
Note
The diagrams show renewal of the left headlight dipped beam
bulb -M29- for the left headlight.
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
218 Rep. gr.94 - Lights, bulbs, switches - exterior