Components cannot be renewed individually. Complete rear in‐
terior light -W45- must be renewed.
– Renew rear interior light -W45- ⇒ page 412 .
6.3.1 Removing and installing rear interior
light -W45-
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
♦ When removing and installing components that are in view
(switches, covers, trim), mask off areas where tools ( re‐
moval wedge -VAS 3409- , screwdriver) are used to lever
out those components using commercially available
masking tape.
Removing
– Release locking lugs -arrows- and remove trim with lens from
rear interior light -W45- .
– Release locking lugs -arrows- and remove rear interior light -
W45- from moulded headliner.
– Disconnect connector -arrow-.
Installing
Installation is carried out in reverse order of removal.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
412 Rep. gr.96 - Lights, bulbs, switches - interior