Troubleshooting
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 305
User Guide
Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
• Use only Xerox approved paper. For details, refer to Supported Paper on page 169.
• Use only dry, undamaged paper.
C
AUTION: Some paper and other media types can cause poor output quality, increased
paper jams, or damage your printer. Do not use the following:
• Rough or porous paper
• Inkjet paper
• Non-laser glossy or coated paper
• Paper that has been photocopied
• Paper that has been folded or wrinkled
• Paper with cutouts or perforations
• Stapled paper
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips
• Padded envelopes
• Plastic media
• Iron-on transfer paper
• Ensure the paper type selected in your print driver matches the paper type on which you are
printing.
• If you have the same size paper loaded in more than one tray, ensure that the proper tray is
selected in the print driver.
• Do not load more than one type, size, or weight of paper in the tray at a time.
• Store your paper and other media properly for optimum print quality. For details, refer to Pap
er
S
torage Guidelines on page 170.
Print-Quality Modes
Select the correct print-quality setting for your print job from the print driver. For instructions on setting
the print quality, see Printing on page 135. To control the print quality:
• Use the print-quality settings in the print driver to control print quality. If the print quality is n
ot
suitable, adjust the print-quality setting to an higher level.
• Use only Xerox approved paper. For details, refer to Supported Paper on page 169.
To Next Page
Loading...
Need help?
General
