Getting Started
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 53
User Guide
Configuring AirPrint
AirPrint is a software feature that allows you to print documents from Apple iOS-based mobile devices
and Mac OS-based devices without a print driver. AirPrint-enabled printers allow you to print or fax
directly from a Mac or from an iPhone, iPad, or iPod touch. You can use AirPrint to print from a wired or
wireless device directly without using a print driver. You can also use AirPrint to scan from a printer to
supported Apple devices.
Notes:
• Not all applications support AirPrint.
• When AirPrint is enabled, HTTP, IPP, and Multicast DNS are enabled automatically.
• IPP enablement requires a Web server reset.
• The device that submits the AirPrint job must be on the same subnet as the printer. To allow
devices to print from different subnets, configure your network to pass multicast DNS traffic
across subnets.
• Supported mobile devices: all models of iPad, iPhone 3GS or later, and iPod touch third
generation or later, running the latest version of iOS.
• If AirPrint is not available on your device, contact your Xerox representative.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address for your printer, refer to Finding the IP Address of Your
Printer on page 46.
2. In the Embedded Web Server, click Properties > Connectivity > Setup.
Note: If this feature does not appear, log in as a system administrator. For details, refer to the
System Administrator Guide at www.xerox.com/office/ALC80XXdocs.
3. For Mobile Workflows, for AirPrint, click Edit.
4. Configure HTTP, IPP, and Multicast DNS Registration as required. To configure a protocol, click Edit.
5. To enable AirPrint, for Enablement, select one or both options:
− Allow Printing/Faxing to be initiated From AirPrint Supported Devices
− Allow Scanning to be initiated From AirPrint (or Mopria) Supported Devices
Notes:
• AirPrint Faxing is supported only on devices that have embedded fax enabled and are
configured to allow sending.
• AirPrint Printing/Faxing is enabled by default.
• To require authentication for AirPrint Printing and Faxing, configure IPP authentication.
• Enabling scanning for AirPrint also enables scanning for Mopria
®
.
To Next Page
Loading...
Need help?
General
