Xerox Phaser 3300 User Manual

8-10 Phaser 3300MFP Service Manual
Service Parts Disassembly
3. To remove the Shaft, first release the locker and slide the Shaft from left to
right, then lift the notch attached to the Cam so that it's released from the
Shaft. Then release the Bush from the Shaft and remove the Shaft from
the Duplex Guide Housing, as shown below.
Fuser Assembly (PL3.0.61)
1. Open the face up cover and open the fuser output guide.
2. Remove the four screws securing the Fuser Assembly, then pull the Fuser
Assembly out of the frame.
s3300mfp-122
2
1
3
4
Cam
Bush
Lock
Shaft
s3300mfp-015

Xerox Phaser 3300 Specifications

General

Brand	Xerox
Model	Phaser 3300
Category	All in One Printer
Language	English