SMart eSolutions
Phaser 4622
System Administrator Guide
102
SMart eSolutions
Device Communication Status
1. At your Workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Click the Status icon.
4. Click on SMart eSolutions.
5. The Device Communication Status section indicates if your machine is successfully
communicating with Xerox. One of the following messages will display:
• Communication Failure
• Customer Not Enrolled
• Fully Configured & Communicating with Xerox
6. If there is an error in communication, the section displays ‘Communication Failure’, click on the
Settings button. The SMart eSolutions Setup page displays.
SMart eSolutions Setup - Enrollment
1. In the Enrollment area:
a. For SMart eSolutions Enrollment, there are two options:
• Enrolled — Communication with Xerox is enabled. This is the default state for the
printer.
• Not Enrolled — Communication with Xerox is disabled. Select this option to stop
communications with Xerox. When you select Not Enrolled a window appears to confirm
that you want to deactivate SMart eSolutions enrollment.
b. Select Enrolled and click on OK when the acknowledgement message displays.
c. The Machine Serial Number displays the serial number of the printer.
SMart eSolutions Setup - Communication Setup
1. In the Communications Setup area:
a. For Daily Transaction Time specify the start time (hour and minute) when SMart eSolutions
communication occurs with Xerox.
b. HTTP Proxy Server displays one of the following:
•Fully Configured
•Not Configured
c. If ‘Not Configured’ is displayed or you want to edit the current configuration, click on
Configure and refer to Proxy Server on page 103.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
