Network Installation
Phaser 4622
System Administrator Guide
24
SNMP Configuration
Allows you to configure the following options when accessing the machine via SNMP v1/v2c.
SNMP Properties:
Protocol Enable – Allows you to enable or disable the SNMP v1/v2c protocols.
Edit SNMP Properties – Displays the page which allows you to set the following SNMP v1/v2c
properties.
Community Names:
• GET Community Name (Read Only) – Enter the community name used for display.
• SET Community Name (Read/Write) – Enter the community name used for display and
update.
Default Trap Community Name:
• TRAP Community Name – Enter the trap notification community name.
Authentication Failure Generic Traps:
• Enable – When the Authentication Failure Generic Trap is enabled, this machine will generate
a trap for every SNMP request that is received by the machine which contains an invalid
community name.
IP Trap Destination Address:
• IP Address: Enter the IPv4 address of the SNMP agent that you are setting up to receive traps.
• UDP Port Number: Enter the UDP port number of the SNMP agent.
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP agent.
• Trap to be Received: Select the types of traps to receive from the SNMP agent
SNMPv3 Configuration
Allows you to configure the following options when accessing the machine via SNMP v1/v2c.
• Context name: enter the name that allows the SNMPv3 agent to identify the management
information associated with the machine.
• User Name: enter the username required for SNMPv3 authentication.
• Authentication Password: enter the password required for SNMPv3 authentication.
•Algorithm: Select the algorithm to be used to encrypt the user authentication information.
MD5 or SHA may be used but the algorithm must match that used by the SNMPv3 agent.
• Privacy password: enter the password required for SNMPv3 packet encryption authentication.
• Algorithm: displays the algorithm used for packet encryption, in the case of SNMPv3 this is
the DES encryption method.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
