Image Quality
WorkCentre 3119 06/06 3-13
IQ 11 Ghost (3)
Description
White ghost occurs in the black image printing at 64mm intervals.
Check and Cause Solution
1. Fuser contamination 1. Disassemble the fuser, REP 9
and remove any contamination on
the rollers. Clean any contamina-
tion from between the thermistor,
and the heat roller, PL 5.
CAUTION
Take care not to deform the rollers.
2. Possible abnormal voltage and
bad contact of the terminal of the
supply roller in the toner cartridge,
PL 1.
2. Install a new toner cartridge, PL
1.
To Next Page
Loading...
Need help?
General
