Xo FLEX Troubleshooting Guide

XO 4 & XO FLEX TROUBLE SHOOTING GUIDE
Version 3.30 86
Device is running
continuously
The floater is blocked in open
position
Clean the floater.
Verify that the floater is moving
freely
Activation signal (X2)
Check the control voltage
Dirty sewage disposal pipe / dirty
siphon
Cleaned the wastewater
evacuation pipe / siphon
Device is generating high
vibrations
The pump cone is clogged
Clean or replace the pump cone.
Centrifuge is clogged.
Clean or replace the centrifuge.
Insufficient water supply
Pump water into the suction line.
Check that rinse is working
properly
Water is not drained out
properly
Centrifuge is clogged
Clean or replace the centrifuge
Dirty sewage disposal pipe / dirty
siphon
Cleaned the wastewater
evacuation pipe / siphon

Xo FLEX Specifications

General

Brand	Xo
Model	FLEX
Category	Dental equipment
Language	English