Pre-fader/Post-fader Effects Sends 123
03D—Owner’s Manual
Pre-fader/Post-fader Effects Sends
Individual input channels and the stereo input channel effects sends can be configured
as either pre-fader or post-fader sends. These settings are made on the Effects Pre/Post
pages.
1. Use the [EFFECT 1] button to locate the Pre/Post page for Effect 1 or the
[EFFECT 2] button to locate the Pre/Post page for Effect 2.
The values below the PRE/POST switches indicate the effects send fader positions.
2. Use the cursor buttons to select the PRE/POST switches and the [ENTER]
button to set them.
If you are using a mouse, simply click the PRE/POST switches.
3. To set all PRE/POST switches to either pre or post, select the GLOBAL PRE
or POST switch and press the [ENTER] button.
If you are using a mouse, simply click the GLOBAL switches.
Effects Returns
Effect 1 and Effect 2 are stereo effects processors, so their output signals are stereo. The
following sections explain the various functions of the effects return channels.
Metering Effects Returns
Effects return signal levels can be viewed on the Eff. Edit page shown below or the Meter
pages. See Metering on page 79 for more information. Send levels can be viewed on the
Effects Library page.
Applying EQ to Effects Returns
Each effects return features four-band parametric EQ. See EQ on page 45 for more
information.
To Next Page
Loading...
Need help?
General
