To Next Page

To Previous Page

Setting a Fade Time 173

03D—Owner’s Manual

Setting a Fade Time

The Fade Time page can be used to specify a common fade time at which fader levels

move to their new positions. This can be used to create cross fades between scenes. The

fade time can be applied to faders individually. Once the Fade Time parameters have

been set, they must be stored to a scene memory before they can be used. When the

scene memory is recalled, its fade time settings are used. When another scene memory

is recalled, the fade time settings of that scene memory are used.

1. Use [SCENE MEMORY] button to locate the Fade Time page shown

below.

2. Select the FADE TIME control.

3. Use the PARAMETER wheel or mouse to set the FADE TIME.

The FADE TIME can be set from 0.0 to 10.0 seconds in 0.1 second steps.

As the only rotary control on the Fade Time page, the FADE TIME control can be

adjusted using the PARAMETER wheel regardless of the cursor position.

4. Use the cursor buttons to select faders and the [ENTER] button to enable

them.

If you are using a mouse, simply click the switches.

5. Store the current mix settings to a scene memory.

The fade time parameters are stored along with other mix settings. When this scene

memory is recalled, enabled faders move to their new positions at the speciﬁed fade

time.

Yamaha 03D User Manual

Other manuals for Yamaha 03D