Recording an Automix 185
03D—Owner’s Manual
Recording an Automix
This section explains how to record an automix.
1. Use the [AUTOMIX] button to locate the Memory page.
2. Create a new automix. See Creating a New Automix on page 180 for more
information.
3. Use the [AUTOMIX] button to locate the Main page.
4. Turn on the automix function. See Enabling Automix on page 180 for
more information.
5. Set the time base. This should be set to match the time base of the exter-
nal device that is providing the timecode. See Setting the Time Base on
page 181 for more information.
6. Use the cursor buttons to select the OVERWRITE switches, and the
[ENTER] button to set them. See Selecting Parameters for Recording on
page 184 for more information.
7. Use the cursor button to select the REC switch, and then press the
[ENTER] button.
If you are using a mouse, simply click the REC switch.
The 03D engages Rec Ready mode and the REC switch flashes.
The [SEL] button indicator of the selected channel goes off. The [SEL] buttons now
function as channel record select buttons.
8. Use the [SEL] and [MIXING LAYER] buttons to select a channel for auto-
mix recording. See Mixing Layer on page 31 for more information.
The indicator of the selected channel’s [SEL] button flashes.
When the Mixing Layer is changed, all [SEL] buttons are turned off.
To Next Page
Loading...
Need help?
General
