112
Error Messages
The following messages may appear during operation, indicating problems or incorrect operation, or to
provide information. These are explained below.
Battery Low
The memory backup battery is low, and memory cannot be
backed up. Store the necessary data to a MIDI data
storage device and have the battery changed by your
local Yamaha dealer or any other authorized Yamaha
service personnel.
Device No.=off Error
Cannot send MIDI bulk data since the Device Number is
set to off.
Device Number Error
Cannot receive MIDI bulk data due to improper Device
Number setting. Match the device numbers for both the
AN1x and the external device.
Not Scene Ctrl
System Exclusive message could not be received since the
Scene Control function is not activated. Press both Scene
switches to activate Scene Control.
Illegal Data
Error occurred during MIDI data receive. Start the transmit
operation once again.
MIDI Buffer Full!
Too much MIDI information received. Eliminate
unnecessary MIDI data.
SysEx Adrs Error
Received System Exclusive message address is incorrect.
Confirm the address of the transmitted data.
SysEx Data Error
Received System Exclusive message data is incorrect.
Confirm the contents of the transmitted data (such as
necessary MSB, LSB data, etc.).
SysEx Size Error
Received System Exclusive message size is incorrect.
Confirm the size of the transmitted data.
Chek Sum Error
Received System Exclusive Check Sum message is
incorrect. Confirm the Check Sum message of the
transmitted data.
Receiving Bulk
Displays when receiving bulk data.
To Next Page
Loading...
Need help?
General
