24
Layer Parameters
The AN1x features Layer parameters in the VOICE SCENE
SETUP menu which let you detune the Unison or Dual layers
when UNISON mode or DUAL mode is selected, or separate
the panning between the two layers when UNISON mode,
DUAL mode or SPLIT mode is selected. For more information,
see page 76.
Portamento Play
Portamento is an effect commonly used in singing or when
playing a bowed instrument (glissando), where the sound
is carried in a continuous glide from one note to the next,
through all the intermediate pitches.
The portamento is applied not only to the AN1x’s voice as
audio output from the internal tone generator, portamento
data is also output from the MIDI [OUT] terminal, which
means it can affect a voice of an external tone generator
assigned to the same MIDI channel as the AN1x, or be
recorded as Control Change data in an external MIDI
sequencer.
Turning PORTAMENTO
On And Off
Pressing the [PORTAMENTO] switch turns the portamento
on or off. Portamento on/off status is stored as voice data.
Pressing [PORTAMENTO] outputs a Control Change
message via the MIDI [OUT] terminal, which can be
recorded as Control Change data in an external MIDI
sequencer.
You can designate the assignable Footswitch to turn the
portamento on and off by foot, using the UTILITY SETUP
Control function (see page 95).
DEMO
PORTAMENTO
STORE
ARPEGGIO/SEQ
LAYER
C1 C2
C1 C2
Key pressed
Key pressed
Normal play
Portamento
Pitch glides from
note to note
To Next Page
Loading...
Need help?
General
