35
Playing Arpeggiated
Chords
Trying out the various arpeggios is a lot of fun. Turn on the
Arpeggio Hold function, play an even-numbered note
chord, and see how the different pattern Types and
Subdivide settings react. Then play an odd-numbered note
chord and repeat the process.
There are a wealth of combinations available at your
fingertips—with relatively straightforward or even
unconventional results awaiting you. And only by rolling
up your sleeves and exploring all the options at hand can
you become an expert at how to get just the right
arpeggio for just the right track.
Keyboard Mode
Press KbdMode [UP/DOWN] to designate how the
Arpeggiator patterns respond to notes played on the
keyboard. Select “chrd” (Chord) if you want to play
arpeggiated chords across the entire keyboard. Select
“chrd&norm” (Chord & Normal) if you want to play
arpeggiated chords to the left of the Split Point and
normal chords to the right.
For information about setting the Split Point, see page 77.
Scene Switch
Press SceneSw [UP/DOWN] to designate which Scene
will play the Arpeggiator pattern. Scenes will play in
accordance with Layer mode and Keyboard Mode
settings.
Common
Arp/SEQ
Type/No
VOICE
ARPEGGIO/SEQ
KbdMode Hold
SceneSw
MIDI
Ptn Tx Ch
Arpeggio
Subdivide
Play EF
Swing
Velocity
GateTime
Common
Arp/SEQ
Type/No
VOICE
ARPEGGIO/SEQ
KbdMode Hold
SceneSw
MIDI
Ptn Tx Ch
Arpeggio
Subdivide
Play EF
Swing
Velocity
GateTime
“scne1” or “scne2”
When the Scene Switch is set to “scne1” or “scne2”,
Scene 1 or Scene 2 will play as follows:
Layer mode = DUAL
● If KbdMode is set to “chrd”, you can play both
Scenes simultaneously across the entire keyboard.
The selected Scene plays the arpeggio, and the
other plays normally.
● If KbdMode is set to "chrd&norm", you can play
both Scenes simultaneously across the entire
keyboard. The selected Scene plays arpeggios
when you play chords to the left of the Split Point,
and plays the Dual voice normally when you play
to the right of the Split Point.
Layer mode = SPLIT
● If “scne1” is selected and KbdMode is set to
“chrd”, you can play arpeggios with Scene 1 to the
left of the Split Point, and arpeggios with Scene 1
and normal chords with Scene 2 to the right.
● If “scne2” is selected and KbdMode is set to
“chrd”, you can play arpeggios with Scene 2 and
normal chords with Scene 1 to the left of the Split
Point, and arpeggios with Scene 2 to the right.
Arpeggiator
Scene 1:
Pad sound
Scene 2:
Decay sound
Scene 2 only
To Next Page
Loading...
Need help?
General
