Yealink W73H DECT User Manual

For CP930W/CP935W, the backlight automatically turns off, when the phone is charging and inactive for a specified time.
When the CP930W/CP935W is not in charging, its backlight will be turned off after the phone is inactive for about 30 seconds.
ProcedureProcedure
1. Go to OKOK > SettingsSettings > DisplayDisplay > Display BacklightDisplay Backlight.
For CP930W, go to MenuMenu > SettingsSettings > Basic SettingsBasic Settings > DisplayDisplay > Display BacklightDisplay Backlight.
For DD phone, go to MenuMenu > Basic SettingsBasic Settings > DisplayDisplay > BacklightBacklight.
For CP935W, go to MoreMore > BasicBasic > DisplayDisplay > BacklightBacklight.
2. Select the desired value from the Active Level field.
For CP935W, slide to adjust the backlight brightness in the Active LevelActive Level field.
3. Select the desired value from the Inactive LevelInactive Level field.
It is only applicable to CP935W.
4. Select the desired value from the In ChargerIn Charger or Out Of ChargerOut Of Charger field.
For CP930W, select the desired value from the Time in ChargerTime in Charger field.
For CP935W, select the desired value from the Backlight TimeBacklight Time field.
5. Confirm the action.
Set the Keypad LightSet the Keypad Light
IntroductionIntroduction
You can enable the keypad light to illuminate the keypad keys when any key is pressed.
Before You BeginBefore You Begin
It is only applicable to W53H/W56H/W73H/W78H/W57R/W59R.
ProcedureProcedure
1. Go to OKOK> SettingsSettings > DisplayDisplay > Keypad LEDKeypad LED.
2. Press ChangeChange to select the Keypad LEDKeypad LED check box (the default status is checked).
Change the LanguageChange the Language
IntroductionIntroduction
Your phone supports several languages that you can choose to use on the phone.
Use Handsets, CP, DD Phones
43

Yealink W73H DECT Specifications

General

Brand	Yealink
Model	W73H DECT
Category	Cordless Telephone
Language	English