4 - 2 ET5X User Guide
•
Omnidirectional (360°) reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
•
The ability to capture and download images to a host for a variety of imaging applications.
•
Advanced intuitive laser aiming for easy point-and-shoot operation.
The imager uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its
memory, and executes state-of-the-art software decoding algorithms to extract the data from the image.
Expansion Back
The Expansion Backs are bar code scanning solutions for both 1D and 2D bar code symbologies. Expansion
Backs are available in the following configurations:
•
SE4710 Expansion Back for 8” tablet
•
SE4750 Expansion Back for 8” tablet
•
SE4710 Expansion Back for 10” tablet
•
SE4750 Expansion Back for 10” tablet.
Install the Expansion Back prior to use. Refer to the ET5X Integration Guide for installation instructions.
For scanner resources, go to the Zebra Barcode Scanner Drivers and Utilities web page,
https://www.zebra.com/us/en/products/software/scanning-systems/scanner-drivers-and-utilities.html
.
Using the SE4750 Expansion Back
To read a bar code:
1. Launch an application.
2. Ensure that the text field is in focus.
3. Point the Expansion Back exit window at a bar code.
NOTE
The Expansion Backs are configured to communicate with the ET5X using HID protocol. Captured bar
code data is sent to the application as keystrokes.
The application text field has to be in-focus prior to scanning.
To Next Page
Loading...
Need help?
General
