EasyManuals Logo
Home>Zebra>Tablet>ET5X

Zebra ET5X User Manual

Zebra ET5X
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
6 - 6 ET5X User Guide
Charge Only Cradle
Communication and Charging Cradles
Table 6-2 Troubleshooting the Charge only Cradle
Symptom Possible Cause Solution
ET5X battery is
not charging.
ET5X was removed from
cradle or cradle was
unplugged from AC
power.
Ensure cradle is receiving power. Ensure ET5X is seated
correctly. Confirm main battery is charging. The battery fully
charges in approximately four hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
The ET5X is not fully
seated in the cradle.
Remove and re-insert the ET5X into the cradle, ensuring it is
firmly seated.
Ambient temperature of
the cradle is too warm or
too cold.
Move the cradle to an area where the ambient temperature is
between 0 °C and 40 °C (32 °F and 104 °F).
Table 6-3 Troubleshooting the Communication and Charging Cradles
Symptom Possible Cause Solution
ET5X battery is
not charging.
ET5X was removed from
cradle or cradle was
unplugged from AC
power.
Ensure cradle is receiving power. Ensure ET5X is seated
correctly. Confirm main battery is charging. The battery fully
charges in approximately four hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
The ET5X is not fully
seated in the cradle.
Remove and re-insert the ET5X into the cradle, ensuring it is
firmly seated.
Ambient temperature of
the cradle is too warm or
too cold.
Move the cradle to an area where the ambient temperature is
between 0°C and 40°C (32°F and 104°F).
During
communication,
no data
transmits, or
transmitted data
was incomplete.
ET5X removed from
cradle during
communications.
Replace ET5X in cradle and retransmit.
Incorrect cable
configuration.
Ensure that the correct cable configuration.
ET5X does not
lock into cradle.
Access cover closed. Open ET5X access cover and re-insert ET5X onto cradle.
ET5X with Rugged
Frame and IO Adapter
does not mate with
Communication and
Charging Cradle.
Use Rugged Communication and Charging Cradle.

Table of Contents

Other manuals for Zebra ET5X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra ET5X and is the answer not in the manual?

Zebra ET5X Specifications

General IconGeneral
BrandZebra
ModelET5X
CategoryTablet
LanguageEnglish

Related product manuals