Zebra LI2208 User Manual

8 - 2 LI2208 PRODUCT REFERENCE GUIDE
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 8-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the Default Parameters on page 7-4.
NOTE See Appendix A, STANDARD DEFAULT PARAMETERS for all user preferences, hosts, and
miscellaneous default parameters.
Table 8-1 Parameter Defaults
Parameter
Parameter
Number
Default
Page
Number
Disable All Code Types n/a n/a 8-6
Enable All Code Types n/a n/a 8-6
UPC/EAN
UPC-A 1 Enable 8-7
UPC-E 2 Enable 8-7
UPC-E1 12 Disable 8-8
EAN-8/JAN 8 4 Enable 8-8
EAN-13/JAN 13 3 Enable 8-9
Bookland EAN 83 Disable 8-9
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) 16 Ignore 8-11
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
000
8-13
UPC/EAN/JAN Supplemental Redundancy 80 10 8-13
UPC/EAN/JAN Supplemental AIM ID Format 672 Combined 8-14
Transmit UPC-A Check Digit 40 Enable 8-15
Transmit UPC-E Check Digit 41 Enable 8-15
Transmit UPC-E1 Check Digit 42 Enable 8-16
UPC-A Preamble 34 System Character 8-16
UPC-E Preamble 35 System Character 8-17
UPC-E1 Preamble 36 System Character 8-18

Zebra LI2208 Specifications

General

Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Linear
Scanner type	1D
Read rate (max)	547 reads/s
Pitch reading angle	-65 - 65 °
Motion tolerance (cm/s)	63.5
Linear (1D) barcodes supported	Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar Expanded, Interleaved 2 of 5, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Input voltage	5 V
Power consumption	165 mA
Power source type	DC
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	EMC FCC Part 15 Class B, ICES 003 Class B, IEC 60601-1-2 Environmental RoHS Directive 2002/95/EEC Electrical Safety C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, UL 60950-1 LED Class 1
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Sustainability certificates	RoHS

Weight and Dimensions

Depth	99 mm
Width	67 mm
Height	160 mm
Weight	140 g