xvi LI2208 PRODUCT REFERENCE GUIDE
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, GETTING STARTED provides a product overview, unpacking instructions, and cable
connection information.
•
Chapter 2, SCANNING describes parts of the linear imager, beeper and LED definitions, and how to use
the linear imager.
•
Chapter 3, USB INTERFACE provides information for setting up the linear imager for USB operation.
•
Chapter 4, RS-232 INTERFACE provides information for setting up the linear imager for RS-232
operation.
•
Chapter 5, IBM INTERFACE provides all information for setting up the linear imager with IBM 468X/469X
POS systems.
•
Chapter 6, KEYBOARD WEDGE INTERFACE provides information for setting up the linear imager for
Keyboard Wedge operation.
•
Chapter 7, USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS provides programming
bar codes for selecting user preference features for the linear imager and commonly used bar codes to
customize how the data is transmitted to the host device.
•
Chapter 8, SYMBOLOGIES describes all symbology features and provides the programming bar codes
necessary for selecting these features for the linear imager.
•
Chapter 9, 123SCAN2 (PC based scanner configuration tool) enables rapid and easy customized setup
of scanners.
•
Chapter 10, ADVANCED DATA FORMATTING (ADF) provides a reference to customize scanned data
before transmitting to the host.
•
Chapter 11, MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS provides
information on how to care for the linear imager, troubleshooting, and technical specifications.
•
Appendix A, STANDARD DEFAULT PARAMETERS provides a table of all host devices and
miscellaneous linear imager defaults.
•
Appendix B, COUNTRY CODES provides instructions for programming the keyboard to interface with a
USB or Keyboard Wedge host.
•
Appendix C, PROGRAMMING REFERENCE provides a table of AIM code identifiers, ASCII character
conversions, and keyboard maps.
•
Appendix D, ASCII CHARACTER SETS provides ASCII character value tables.
•
Appendix E, NON-PARAMETER ATTRIBUTES defines non-parameter attributes, such as Model
Number and Serial Number.
•
Appendix F, SAMPLE BAR CODES includes sample bar codes.
•
Appendix G, ALPHANUMERIC BAR CODES includes the bar codes representing the alphanumeric
keyboard, used when setting ADF rules.
•
Appendix H, NUMERIC BAR CODES includes the numeric bar codes to scan for parameters requiring
specific numeric values.
•
Appendix I, COMMUNICATION PROTOCOL CAPABILITIES includes a list of the functionality of each
cabled communication interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
