Zebra LI2208 User Manual

1 - 2 LI2208 PRODUCT REFERENCE GUIDE
Scanner Parts
Figure 1-1 Parts of the Linear Imager
Configuring the Linear Imager
Use the bar codes in this manual or the 123Scan
2
configuration program to configure the linear imager. See
Chapter 7, USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS for information about
programming the linear imager using bar code menus. Also see each host-specific chapter to set up
connection to a specific host type. See Chapter 9, 123SCAN2 to configure the linear imager using this
configuration program.
Scan Window
Scan Trigger
LED
Beeper

Zebra LI2208 Specifications

General

Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Linear
Scanner type	1D
Read rate (max)	547 reads/s
Pitch reading angle	-65 - 65 °
Motion tolerance (cm/s)	63.5
Linear (1D) barcodes supported	Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar Expanded, Interleaved 2 of 5, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Input voltage	5 V
Power consumption	165 mA
Power source type	DC
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	EMC FCC Part 15 Class B, ICES 003 Class B, IEC 60601-1-2 Environmental RoHS Directive 2002/95/EEC Electrical Safety C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, UL 60950-1 LED Class 1
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Sustainability certificates	RoHS

Weight and Dimensions

Depth	99 mm
Width	67 mm
Height	160 mm
Weight	140 g