7 - 30 TC56 User Guide for Android Version 6.0.1
2. Push the Rugged Charge/USB Cable to the other side.
3. Remove the device from the Rugged Charge/USB Cable.
Battery Charging
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device.
The 4,300 mAh battery charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to
100% in approximately three hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device always performs battery charging
in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the device may for
small periods of time alternately enable and disable battery charging to keep the battery at acceptable
temperatures. The device indicates when charging is disabled due to abnormal temperatures via its LED.
NOTE Charging using a host computer USB port or a power supply other than the Zebra PWR-WUA5V12W0xx
could take longer. See Table 7-1 on page 7-1.
Non-Zebra power supply must provide 5 VDC @ 2.5 A.
NOTE In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for
approximately 14 hours of use.
To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries
at room temperature with the TC56 in sleep mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
