2 - 24 TC56 User Guide for Android Version 6.0.1
Transferring Files using Media Transfer Protocol
1. Connect the Rugged Charge/USB Cable to the TC56 or place the TC56 into the 1-Slot USB/Charge Only
Cradle. See Chapter 7, Accessories for setup information.
2. Pull down the Notification panel and touch USB for Charging.
Figure 2-20 Use USB Dialog Box
3. Touch File transfers.
4. On the host computer, open a file explorer application.
5. Locate the TC56 as a portable device.
6. Open the SD card or the Internal storage folder.
7. Copy files to and from the TC56 or delete files as required.
Transferring Files using Photo Transfer Protocol
1. Connect the Rugged Charge/USB Cable to the TC56 or place the TC56 into the 1-Slot USB/Charge Only
Cradle. See Chapter 7, Accessories for setup information.
2. Pull down the Notification panel and touch USB for Charging.
NOTE Use Media Transfer Protocol (MTP) to copy files between the TC56 (internal memory or microSD card)
and the host computer.
NOTE Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to the
host computer.