Using the TC56 2 - 23
Suspend Mode
The TC56 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the
Display settings window).
To wake the TC56 from Suspend mode, press the Power button.
The Lock screen displays. Slide to the right toward to unlock the screen. If the Pattern screen unlock feature
is enabled, the Pattern screen appears instead of the Lock screen. See Un-Locking the Screen on page 2-18.
Figure 2-19 Lock Screen
Transferring Files with a Host Computer via USB
Connect the TC56 to a host computer using the USB Charging cable or the 1-Slot USB cradle to transfer files
between the TC56 and the host computer. See Chapter 7, Accessories for more information.
When connecting the TC56 to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files.
NOTE If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before
trying again.
If the user forgets the PIN, password or pattern contact the system administrator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
