Tractor an introductio
The word 'tractor' is derived from 'traction', which means towing.
A tractor is necessary for drawing or towing equipment, implements or carts that are suitably connected to
the tractor body.
The tractor can also be used as a driving machine, thanks to the Power Take-off or PTO shaft.
This manual provides instructions for the operation, maintenance and storage of all Zetor tractor models.
This material has been elaborated in detail to help you better understand maintenance and efficient
operation.
If you need information not provided in this manual or the services of a trained mechanic, please contact
Zetor Dealer/distributor at your location. Dealers and distributors are kept informed about the latest methods
of servicing tractors.
They are supplied with original spare parts and are fully supported by the manufacturer.
Through this manual
The use of the terms LEFT, RIGHT, FRONT and REAR must be understood, to avoid any confusion when
following the introductions. The LEFT and RIGHT means left and right sides of the Tractor when facing
forward in the driver's seat, Reference to the FRONT indicates the radiator end of the Tractor, while the
REAR, indicates the drawbar end (Fig. U18N002).
When spare parts are required, always specify the Tractor and engine serial number when ordering these
parts. (See Fig. U18N001).This will facilitate faster delivery and help ensure that the correct parts for your
particular Tractor is received. The tractor serial number is punched on a plate attached to the left hand side
of the engine body (See Fig. U18N001), For easy reference, we suggest you to write the number in the
s
ace
rovided in the owner's
ersonal data
1 - Right turn (Clockwise)
2 - Right
3 - Front
4 - Left
5 - Rear
6 - Left turn (Counterclockwise)
U18N002
INTRODUCTION & DESCRIPTION
To Next Page
Loading...
Need help?
General