Type designation, see section Type designation key
1
Name and address of the manufacturer2
Frame size3
Cooling method4
Degree of protection5
Ratings, see section Electrical ratings (page 165)
6
Short-circuit withstand strength, see section Electrical power network specification (page 174)
7
Valid markings8
Serial number. The first digit of the serial number refers to the manufacturing plant. The next four digits
refer to the unit’s manufacturing year and week, respectively. The remaining digits complete the serial
number so that there are no two units with the same number.
9
Link to product information10
Type designation key
The type designation contains information on the specifications and configuration of the
drive. The first digits from left express the basic drive type. The optional selections are given
thereafter, separated by plus signs. Codes preceded by zero indicate the absence of the
specified feature. The main selections are described below. Not all selections are available
for all types. For more information, refer to the ordering instructions available separately on
request.
￭ Basic code
DescriptionCode
Product seriesACQ580
Type
When no options are selected: low-harmonic single drive module to be installed in an enclosure,
IP00 (UL open type), bookshelf mounting with pedestal, integrated control unit with ACH-AP-H
Assistant control panel with panel holder, build-in LCL filter, full-size output cable connection ter-
minals, internal EMC filter (+E210), common mode filter (+E208), DC connection busbars, ACQ580
standard pump control program, RS-485 Modbus RTU adapter module, Safe torque off function,
coated boards, printed multilingual quick installation and start-up guides, extraction/installation
ramp.
-34
Size
38 Operation principle and hardware description
To Next Page
Loading...
Need help?
General
