￭ Free space at the top of the drive module
The required free space at the top of the drive module is shown below.
Air inlet1
Air outlet2
￭ Free space around the drive module
A free space of 20 mm (0.79 in) around the drive module is required from the cabinet back
panel and front door. No free space for cooling is required on the left- and right-hand sides
of the module.
The module can be installed in a cabinet with the following dimensions:
• width 800 mm (31.50 in)
• depth 600 mm (23.62 in)
• height 2000 mm (78.74 in).
ABB air inlet and outlet kits
See chapter Ordering information (page 159).
Guidelines for planning the mechanical installation 59
To Next Page
Need help?
General
