ABB ACS380 Series User Manual

Start-up, ID run and use 27
Set the drive parameters
Open Diagnostics
1. Select the Main menu from the Home view.
2. Scroll to Parameters, and press the OK button to open
the submenu.
3. Select the complete parameters list with the arrow button
and press the OK button, or
4. Select the modified parameters list with the arrow button
and press the OK button.
5. Select the parameter and press the OK button.
The parameters are shown in respective groups. The
first two digits of the parameter number represent the
parameter group. For example, parameters starting with
30 are in the Limits group.
See chapter Parameters for more information.
1. Select the Main menu from the Home view.
2. Scroll to Diagnostics and press the OK button to open
the submenu.
3. Select the warning or fault with the arrow button and
press the OK button.
See chapter Fault tracing for more information.

ABB ACS380 Series Specifications

General

Brand	ABB
Model	ACS380 Series
Category	DC Drives
Language	English