ABB ACS380 Series User Manual

Parameters 261
Temp sensor 2
excitation
The output is used to feed an excitation current to the
temperature sensor 2, see parameter 35.21 Temperature
2 source. See also section Motor thermal protection
(page 92).
21
Abs motor speed used 01.61 Abs motor speed used 26
Abs motor speed % 01.62 Abs motor speed % 27
Abs output frequency 01.63 Abs output frequency 28
Abs motor torque 01.64 Abs motor torque 30
Abs output power 01.66 Abs output power 31
Abs motor shaft power 01.68 Abs motor shaft power 32
External PID1 out 71.01 External PID act value 33
AO1 data storage 13.91 AO1 data storage.37
Other
49.20 Basic panel home
view 2
Selects the parameters that are shown in Home view 2 of
the integrated or Basic panel (ACS-BP-S).
See parameter 49.19 for the selection.
49.21 Basic panel home
view 3
Selects the parameters that are shown in Home view 3 of
the integrated or Basic panel (ACS-BP-S).
See parameter 49.19 for the selection.
49.30 Basic panel menu
hiding
Parameter to hide main level menus in the integrated or
Basic panel (ACS-BP-S).
Values are:
0 = Menu visible
1 = Menu hidden
0000h
0000h…FFFFh 1=1
40
50 Fieldbus adapter (FBA)
Fieldbus communication configuration.
See also chapter Fieldbus control through a fieldbus
adapter (page 431).
50.01 FBA A enable Enables/disables communication between the drive and
fieldbus adapter A, and specifies the slot the adapter is
installed into.
Disable
Disable Communication between drive and fieldbus adapter A
disabled.
0
Enable Communication between drive and fieldbus adapter A
enabled. The adapter is in slot 1.
1
No. Name/Value Description Default
FbEq 16
Bit Value
0 Motor data
1 Motor control
2 Control macros
3 Diagnostics
4 Energy efficiency
5 Parameters
6...15 Reserved

ABB ACS380 Series Specifications

General

Brand	ABB
Model	ACS380 Series
Category	DC Drives
Language	English