ABB IRB 2600 Series User Manual

NoteAction
WARNING
Before continuing any service work, follow
the safety procedure in section The brake
release buttons may be jammed after service
work on page 194!
8
Refit the push button guard to the SMB cover.9
Press the push buttons 1 to 6, one at a time,
to make sure that the buttons are moving
freely and do not stay in any locked position.
10
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section First test run
may cause injury or damage on page 28.
11
244 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.3.5 Replacing the brake release board
Continued

ABB IRB 2600 Series Specifications

General

Brand	ABB
Model	IRB 2600 Series
Category	Robotics
Language	English