ABB IRB 2600 Series User Manual

4.2.4 Cut the paint or surface on the robot before replacing parts
General
Follow the procedures in this section whenever breaking the paint of the robot
during replacement of parts.
Required equipment
NoteSpare partsEquipment
EthanolCleaning agent
Knife
Lint free cloth
3HAC037052-001Touch up paint Standard/Foundry
Plus, ABB Orange
Removing
DescriptionAction
xx0900000121
Cut the paint with a knife in the joint between
the part that will be removed and the struc-
ture, to avoid that the paint cracks.
1
Carefully grind the paint edge that is left on
the structure to a smooth surface.
2
Product manual - IRB 2600 193
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.2.4 Cut the paint or surface on the robot before replacing parts

ABB IRB 2600 Series Specifications

General

Brand	ABB
Model	IRB 2600 Series
Category	Robotics
Language	English