ABB RED615 User Manual

Section 4 Using HMI locally or via web interface
4.1 Using LHMI
You must be logged in and authorized to use the LHMI. Password authorization is
disabled by default and can be enabled either via the LHMI or WHMI.
To enable password authorization, select Main Menu/
Configuration/Authorization/Local override. Set the parameter to
False.
4.1.1 Logging in
1.
Press any key except for to activate the login procedure.
2.
Press or to select the user level.
A070888 V3 EN
Figure 6: Selecting access level
3.
Confirm the selection with .
4. Enter the prompted password digit by digit.
1MRS756499 A Section 4
Using HMI locally or via web interface
RED615 29
Operation Manual

ABB RED615 Specifications

General

Brand	ABB
Model	RED615
Category	Protection Device
Language	English