ABB RED615 User Manual

value is not stored in non-volatile memory and thus the reboot
restores the original value.
GUID-834A71AE-B6C1-4EAD-840F-929B3AF18A85 V3 EN
Figure 32: Committing changes
Committing values will take a few seconds.
If you only write values to the IED and then reboot, the old values
will resume in the IED as active values and the new values are lost.
4.2.8 Clearing and acknowledging
Reset, acknowledge or clear all messages and indications, including LEDs and latched
outputs as well as registers and recordings, in the Clear menu.
1. Click the Clear menu.
Section 4 1MRS756499 A
Using HMI locally or via web interface
50 RED615
Operation Manual

ABB RED615 Specifications

General

Brand	ABB
Model	RED615
Category	Protection Device
Language	English